Spider
The connector or coupling for rafters, spacers, and vertical support poles.
09Jul
Read more...
09Jul
Spring pole
The spring pole acts as an anchoring post for the side skirts and ground pole. It attaches to a bracket on the trailer at each end of the canopy. The foot base is spring loaded so it rides up and down depending on the weight in the trailer and the terrain.
09Jul
Roadside Mount
Roadside Mount
Standard canopies mount onto the Curbside or Roadside of the trailer. A Roadside mount goes on the driver's side of the trailer, facing the street. Sometimes referred to as a street side mount.
09Jul
Rafter Ring
Rafter Ring
Also called a "pad eye". The ring is attached to the trailer. The end of the rafter hooks into this ring.
09Jul
Spinnaker End
A spinnaker end is attached to the trailer end of each rafter. The spring loaded hook is cocked using a cable that runs thru the rafter. The hook snaps into the rafter ring securing the rafter to the trailer.
09Jul
Prefeeder
Prefeeder
Mounting hardware that helps guide the bolt-rope into the awning rail or "C" channel.
09Jul
Awning Rail
Awning Rail
Also called "C" channel, "C" track or trailer track. Holds the bolt rope or keder and keeps the canopy attached to the trailer.
09Jul
Curbside Mount
Curbside Mount
Standard canopies mount onto the Curbside or Roadside of the trailer. A Curbside mount goes on the passenger side of the trailer, next to the curb when parked.
09Jul
Footman Loop
Footman Loop
A footman loop is a low profile metal bracket that provides an anchor point on the trailer to secure various sections of the canopy. Some of the common places they are utilized include: The canopy roof -To tension the bolt rope end to end. Roof ends ~ To tether the roof ends to the trailer...
09Jul
Ground poles & Threshold plates